HDMI Signal Extender over 100m support POE function with HDbaset
Introduction :
The cat5e / cat6 HDMI Extender is a tool which can extend your HDMI signal over 328fts / 100meters to a compatible display . It is designed to convert HDMI signal to standard HD baseT signal which can be transmitted by Internet cable . It also supports Transfer Bidirectional Infrared control signal together with the HDMI signal , so you can control the Source in the Sink side which is 328fts outside , also you can control the Sink in the Source side which is 328fts outside using the HDMI Extender .
Features :
- POE ( Power Over Ethernet ) function is supported , either TX or RX is powered by24V @ 1A power supply , another does not need power from the DC jack . POE Power consumption is less than 10W . - See the description 1
- Use single UTP LAN cable ( CAT - 5E / 6 ) to substitute HDMI cable to achieve long distance transmission .
- UTP cable termination follows the standard of IEEE - 568B .
- Transmission distance : Over CAT6 cable 100 meters : 1080P @ 60Hz36bit ; 3D1080P @ 30Hz36bit ; 70 meters : 1080P @ 60Hz @ 48bit ; 1080P @ 120Hz @ 24bit ; 3D1080P @ 60Hz @ 36bit ; 4K x 2K @ 30Hz @ 24bit.
- Support display resolutions up to 4K x 2K @ 30Hz
- Full HD support : 1080p @ 60Hz @ 48 bit / pixels , 1080p @ 120Hz @ 24 bit / pixels , 3D 1080P60Hz and 4K x 2K @ 30Hz @ 24bit .
- Transfer Bidirectional Infrared control signal together with the HDMI signal . - See the description 2 .
Specifications
|
| ||
|
| ||
| |||
|
| ||
| |||
|
|
Company QR code Anytime Anywhere Mobile |